OptoCoupler (Illustration similarly)
ReedRelais (Illustration similarly)

• Easily connects digital in- an output lines without additional hardware
• 16 potential free reed output or opto input channels
• connection is done without screwing or soldering using clemp connectors
• Reed relais with closing or two-way contacts
• Reliable Meder-Relais switches 0.5A @ 30V
• Network enabled Software ClewareControl - switching from remote PC possible
• Contained in black plastic housing (85 x 55 x 45 mm) (IP30)
• USB device with a 2 m USB- cable
• Multiple devices at a single PC supported
• Application Program Interface (DLL)for easy integration in user applications
• Software included with the device: Control software ClewareControl for time controlled switching, USBswitch with a simple graphical user interface and USBswitchCMD for switch through a command line interface
• No driver installation needed with Windows® variants that support USB.
  (® Microsoft Windows is a registered trademark of the Microsoft Corporation.)
• Linux support also available.
• RoHS, CE & EN60950 conform / IP30
• For indoor use only
• Any devices identifies with a unique serial number
• 4 years warranty
• Made in Germany
  

Please order by sending email to order@cleware.de or take our Enquiry form.

Description

A very simple and straight forward methode for connecting digital in- and output signal to a PC is realized with our new product family USB-Opto Reed. Up to 16 potential free in- or output channels are available. The connection is done without screwing or soldering using clemp connectors in teh standard configuration. Please ask if you need other connectors, e.g. pin-plug or Sub-D.

Base of this device family is the USB-Opto 8. This device is equipped with 8 opto coupler input channels. The insulation voltage is well above 5.000 V. The opto coupler is operated @ 1,2V/10mA. The connectors are labeled with Gnd and +.

If additional opto input channels are needed, a second input circuit with another 8 channels is available.

Onother option are 4 or 8 relais output channels which could be added to the base device. The relais are available with closing or if needed with change over contacts.The reed relais are high reliability Meder® relais. The relais are capable to switch 0.5A @ 30V.

The device is available in these configurations:

All of our USB devices will operate without installing drivers. The ones that are deliverd with the operating system are fully sufficient. Modern Linux variants runs our products seamless.

The device could be controlled with the included software „Cleware Control“. It will run with any Windows®- operating system with USB support. Also included are command line tools for easy access from customer software. For more integrated solutions, a DLL -Control ist available. Examples in VC++, VB, Linux and Delphi are ready for download for free.

The USB-OptoReed Series uses a 85 x 55 x 45 mm housing. The USB cable is about 2 m long. A 3.7 m long USB cable is available on request. The devices are for indoor usage only and must be protect against humidity. The operating temperature range is -20° and +80° Celsius. Below 0° Celsius the connecting cords must not be moved.

Multiple devices could be driven and identified on one PC because all of our USB devices got a unique serial number. This could be used accessing the device.

CAUTION:
PC-Software always contains errors or could be manilpulated from other software. Our USB-devices should not be used in cases where the function will harm people!